The 12.0kw competition series amplifier is a 12,000 watt amplifier. It is capable of running up to 16 volts
for up to 13000 watts. It is a 2 channel amp and is designed to run at 0.5 ohm per channel or 1 ohm bridged.
It comes with a bass knob. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.
Key Features
• .5 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
• 2 channel
• Triple 0 awg power and ground inputs
We recommend for installation
• 1 upgraded battery under the hood
• 3 extra 800ci battery in the rear
• Minimum of two 0 awg ran from the front battery to the rear batterys
• All 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 6 runs into the amp
• 2 upgraded aftermarket alternators
• Dash mounted voltage meter
| Features | Voltage | 12.0K | |
| Output Power (RMS) | 4 ohm | 14.4V | 1,200W x 2 |
| 2 ohm | 2,100W x 2 | ||
| 1 ohm | 3,400W x 2 | ||
| .5 ohm | 12V | 4,200W x 2 | |
| .5 ohm | 14.4V | 5,500W x 2 | |
| .5 ohm | 16V | 6,500W x 2 | |
| Working Voltage | 8.5V~16V | ||
| Frequency Response | Hz (-3dB) | Hz | 20~250 |
| Signal to Noise Ratio | dB | 100 | |
| Damping factor | 250< | ||
| Efficiency @ 4ohm | % | 85% < | |
| Low Level Input | V | 6V - 0.2mV | |
| Line Output | Yes | ||
| Low Pass Filter | Switchable | ||
| ( @ 24 dB Slope) | Variable | Hz | 35~250 |
| Bass Boost ( @45Hz ) |
Switchable | ||
| Variable | dB | 0 ~ 9 | |
| Subsonic Filter | Switchable | ||
| ( @ 24dB slope ) | Variable | Hz | 10~50 |
| Remote Level Control | Yes | ||
| Double Sided board | 2 oz | ||
| 3 oz | Yes | ||
| Indicator | Power | Yes | |
| Protection | Yes | ||
| Speaker & Power terminal | Mold Type | Yes | |
| Power | Gauge | 0Ga x 3 | |
| Fuses | External | Yes | |
| Heatsink Length | mm (inch) | 850(33.46) |
