DC Audio 7.5k

Amplifier Description

The 7.5kw competition series amplifier is a 7,500 watt mono block. It is capable of running up to 18 volts for up to 9,200 watts. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped.

It comes with a bass knob. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground.


Output Power (RMS)

4 ohm 2000Wx1 @ 14.4 Volts

2 ohm 4400Wx1 @ 14.4 Volts

1 ohm mono 7500x1 @ 14.4 Volts

1 ohm mono 8600x1 @ 16.0 Volts

1 ohm mono 9200x1 @ 18.0 Volts

Key Features

• 1 ohm stable

• Variable low pass filter

• Variable subsonic filter

• Variable bass boost

• Wired Bass Knob remote control

• RCA Pass Thru

• Linkable

• Dual 0 Awg Power Ground Inputs

Recommended for installation :

2 Upgraded Alternators or 325 amps of charging power

Upgraded under hood Battery

1000ah of AGM Batteries in the trunk or 140ah Lithium

Dash mounted voltage meter

0 Awg OFC power and ground

Power & ground runs from front to back batteries.

DO NOT mount to subwoofer box. (will void warranty)

AMP SPECS:

DC Amp Model: 7.5k
Input Sensitivity 6V~0.2V
Frequency Response 20Hz~250Hz
24dB / Octave Crossover YES
Low Pass 35Hz ~ 250Hz
Subsonic Filter 10Hz-50hz
Bass Boost @45hz 0 ~ 9db
Phase Shift 0 ~ 180
Remote Control Yes
Clip Indicator No
Signal to Noise Ratio dB100
Damping Factor 250<
THD @ 4ohms Less than 0.1%
Fuse Rating External 350 amp x 2
LED Status Lights Power and Protect
Master/Slave YES
Heatsink Length 32.28"/820mm
Heatsink Width 11.5"/292mm
Heatsink Height 2.6"/66mm

Overview Video

Check out what the 7.5k Amplifier from DC Audio is all about

 

Customer Installs