DC Audio 9.5k
Amplifier Description
The 9.5kw competition series amplifier is a 9,500 @14.4 vdc watt mono block. It’s a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped.
It comes with a bass knob and clip light. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.
Output Power (RMS)
3,900x1 @ 4 ohms 14.4 volts
6,800x1 @ 2 ohms 14.4 volts
9,500x1 @ 1 ohms 14.4 volts
12,000x1 @ 1 ohm 16.0 volts
19,000x1 @ 2 ohm 14.4 volts LINKED
24,000x1 @ 2 ohm 16.0 volts LINKED
Max Charge Voltage 16.2 volts
Key Features
• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired Bass Knob remote control
• RCA Pass Thru
• Linkable
• Triple 0 Awg Power Ground Inputs
Recommended for installation :
2 Upgraded Alternators or 350 amps of charging power
Upgraded under hood Battery
1000ah of AGM Batteries in the trunk or 140ah Lithium
Dash mounted voltage meter
0 Awg OFC power and ground
Power & ground runs from front to back batteries.
DO NOT mount to subwoofer box. (will void warranty)
AMP SPECS:
| DC Amp Model: | 9.5k |
|---|---|
| Input Sensitivity | 6V~0.2V |
| Frequency Response | 12Hz~264Hz |
| 24dB / Octave Crossover | YES |
| Low Pass | 35Hz ~ 250Hz |
| Subsonic Filter | 10Hz-50hz |
| Bass Boost @45hz | 0 ~ 9db |
| Phase Shift | 0 ~ 180 |
| Remote Control | Yes |
| Clip Indicator | Yes |
| Signal to Noise Ratio | 88db |
| Damping Factor | 400< |
| THD @ 4ohms | Less than 0.1% |
| Fuse Rating | External 300 amp x 3 |
| LED Status Lights | Power and Protect |
| Master/Slave | YES |
| Heatsink Length | 27.56"/700mm |
| Heatsink Width | 9.38"/238.25mm |
| Heatsink Height | 2.35"/59.6mm |
Overview Video
Check out what the 9.5k Amplifier from DC Audio is all about